What is the Makeblock XTool D1? Acrylic Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Acrylic Engraving Machine
The firm was established in 2012 by Jasen Wang, that examined airplane layout at Northwestern Polytechnic College. The business is committed to developing cutting-edge products to aid people express themselves with development. Because its production, Makeblock has actually launched numerous instructional robotics, as well as a coding system for kids. It likewise released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing and also inscribing a selection of products. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, and can be made use of for various projects. In addition to inscription, the D1 can likewise be utilized for various other tasks, consisting of developing fashion jewelry and also lamp tones.
The D1 is a do it yourself set that can be assembled in only about half an hour. Its unit is collapsible, permitting very easy transportability as well as reliable air flow. It is also made from flame-retardant polyester, making it safe from dirt particles. The enclosure likewise shields the working surface under the maker.
The XTool D1 is equipped with a laser module that is capable of engrave on metals and also lots of other products. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer engraving and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a wide variety of materials. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Shop or the Apple Application Store. The application can be used to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can likewise be linked to a computer using USB or WiFi. It can also transfer data by means of Wi-Fi or a big ability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most generally used woods for laser cutters. The D1 can likewise cut on other timbers, including hard maple, walnut, as well as rosewood. Its laser head is adjustable, permitting a 50mm array. It can additionally refine products approximately 10mm thick, which means that it has the ability to etch on a wide array of materials. The D1 is created for both residence and also service use.
The XTool D1 comes in two designs: the 20W variation and also the 5W model. The 20W version has a bigger laser head, and also a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster equipment. Acrylic Engraving Machine
The D1 includes a steel framework, which provides optimum security and also sturdiness. It additionally has a simultaneous belt to boost movement precision. The belt’s modest tension is needed for precision, specifically when relocating at high speeds. The concurrent belt can likewise aid the maker keep stable and also lessen vibration. It can additionally remove the motion space, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an outstanding selection for nearly all inscribing jobs. Its design is secure as well as trusted. It is perfect for local business and also enthusiasts.
It can engrave various types of steel and wood. It has the capability to cut eight to tenmm plywood in one pass. It additionally has the capacity to reduce leather as well as polymer.
It comes with a number of accessories. You can buy the bundle pack that consists of the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can likewise obtain a 1064nm laser head. This head reduces shed marks in plastic and also is particularly beneficial for fragile precious jewelry designs. It likewise has a motion sensor and also flame detection sensor.
It also features an emergency stop button. It can be regulated via WiFi and also can import laser designs from free vector sites like Etsy. You can likewise manage it via the Makeblock XTool D1 app on Android and also iphone.
It has a great emphasis system. The laser crosshairs relocate as required as well as transfer to the structure of the art work. This makes the etching really precise. It can likewise be utilized to produce a thickening impact, which can be useful when etching large products.
The XTool D1 Pro has actually boosted attributes and also laser power. It utilizes a 20W laser module to create a beam of light that cuts items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a higher rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is extremely smart. Beside the laser module, there is a swivelling arm which you take out when you want to focus the laser. It assures that you drop the head on the proper distance from the material. Then you tighten the thumb screw and pivot the arm back up. Acrylic Engraving Machine
XTool D1 Special Features
Below are a few of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Device can be attached via USB or a WiFi. As well as you can additionally control with a smartphone application on Android or iOS.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The equipment can reduce timber, specifically Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would prevent some plastics like PVC as well as plastic given that it releases hydrogen chloride gas while being reduced. This gas is poisonous and very harsh (your machine will corrosion promptly).
We have checked the machine with engraving and also cutting various materials. You will discover the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This must allow for more precision and also much less mechanical wobble when etching at broadband. Acrylic Engraving Machine
Advanced Stepper Electric Motor Drivers
The maker has an extremely sophisticated controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. This way the electric motors are really specific and also quiet. The motorists likewise support homing treatment without making use of limit switches over as the chauffeurs determine current via motors and also find the limit in this manner. This is why this equipment does not require physical limitation switches over for homing.
The machine has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis rather than having to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device automatically stops if an unintentional touch occurs. This is excellent for individuals who are worried about safety and security. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have the artwork prepared, you can use the application to establish the laser. You can also customize the laser setups and create custom art work. The app also includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 products. The laser engraver tool is easy to use as well as features a protective cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a really versatile etching device. It cam be made use of to etch on all types of products/.
Below is a listing of products as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out maker. Precise, quick as well as solidly developed. It comes with a costs price, yet it is worth it for somebody that desires an excellent as well as almost a commercial quality table leading laser engraver capable of quick cutting and also precise inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription and also reducing machine on our checklist is XTool D1 pro, the very best choice to Glowforge. It is in first place due to the fact that it has actually received the Red Dot Layout 2022 Honor. The impressive design and cutting edge modern technology established this machine in addition to other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and etch a massive selection of materials, from something as slim as cells paper to something as thick as leather and wood panels.
XTool D1 is a diode laser inscription and cutting maker that is compatible with a vast array of materials, including different types of timber. Its powerful and also extremely concentrated laser can quickly cut as well as inscribed timber with utmost precision and also precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is particularly made for metal and also plastic inscription. It can engrave different steels, consisting of light weight aluminum as well as rare-earth elements. It can also do colored etching on numerous metals, including aluminum.