What is the Makeblock XTool D1? Air Assist Xtool D1
XTool D1 is a laser cutter that has actually been produced by Makeblock. Air Assist Xtool D1
The firm was developed in 2012 by Jasen Wang, that examined airplane layout at Northwestern Polytechnic College. The firm is devoted to producing innovative items to aid individuals reveal themselves with production. Given that its development, Makeblock has released a number of instructional robots, along with a coding system for children. It likewise released the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting as well as engraving a variety of materials. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and can be made use of for various projects. In addition to inscription, the D1 can likewise be utilized for other jobs, consisting of producing jewelry as well as light shades.
The D1 is a DIY set that can be constructed in just regarding half a hr. Its room is collapsible, allowing for very easy mobility as well as efficient ventilation. It is additionally constructed from flame-retardant polyester, making it risk-free from dust particles. The room likewise safeguards the functioning surface area under the device.
The XTool D1 is geared up with a laser module that is capable of engrave on metals and lots of various other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer engraving as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to inscribe on a large range of products. The D1 additionally has an integrated mobile phone application that can be downloaded from the Android Shop or the Apple Application Store. The application can be used to import laser layouts from totally free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system by means of USB or WiFi. It can likewise transfer information using Wi-Fi or a huge capability TF card.
The D1 can etching on Poplar plywood, which is just one of one of the most typically used woods for laser cutters. The D1 can also reduce on various other woods, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm range. It can likewise process materials approximately 10mm thick, which indicates that it has the ability to engrave on a variety of products. The D1 is developed for both home as well as organization usage.
The XTool D1 comes in 2 designs: the 20W variation as well as the 5W model. The 20W version has a bigger laser head, as well as a smaller working location. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster maker. Air Assist Xtool D1
The D1 features a steel framework, which gives maximum stability and also durability. It likewise has a simultaneous belt to enhance movement accuracy. The belt’s modest stress is required for accuracy, especially when relocating at high speeds. The simultaneous belt can likewise assist the equipment keep steady as well as decrease vibration. It can likewise get rid of the motion gap, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent option for mostly all etching jobs. Its design is safe and also dependable. It is ideal for small businesses as well as hobbyists.
It can etch different kinds of steel as well as timber. It has the capability to cut eight to tenmm plywood in one pass. It also has the ability to reduce natural leather and polymer.
It comes with a variety of devices. You can buy the package pack that consists of the Air Assist Set as well as Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can likewise obtain a 1064nm laser head. This head lowers melt marks in plastic and also is especially useful for fragile jewelry layouts. It additionally has a motion sensing unit and also fire discovery sensing unit.
It additionally features an emergency quit button. It can be regulated via WiFi as well as can import laser designs from free vector websites like Etsy. You can also control it using the Makeblock XTool D1 app on Android and also iphone.
It has a very good focus system. The laser crosshairs move as required and transfer to the structure of the art work. This makes the etching very accurate. It can also be utilized to produce a thickening effect, which can be helpful when inscribing large products.
The XTool D1 Pro has boosted features and also laser power. It makes use of a 20W laser module to produce a beam of light that reduces items in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is very brilliant. Alongside the laser component, there is a rotating arm which you pull out when you wish to focus the laser. It assures that you go down the directly the appropriate distance from the material. Then you tighten the thumb screw and pivot the arm back up. Air Assist Xtool D1
XTool D1 Special Features
Below are a few of the top Special Functions of the XTool D1:
Wireless Connection
Equipment can be attached by means of USB or a Wi-fi. And you can also control with a smart device app on Android or iphone.
Cutting and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The equipment can cut wood, specifically Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC and plastic since it releases hydrogen chloride gas while being reduced. This gas is hazardous and also very corrosive (your maker will certainly rust quickly).
We have checked the maker with inscription and also reducing various products. You will locate the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other machines. This ought to permit more accuracy and also much less mechanical wobble when etching at broadband. Air Assist Xtool D1
Advanced Stepper Motor Drivers
The equipment has an extremely innovative controller board. It has Trinamic stepper electric motor chauffeurs which drive the motors with a pure sine wave. In this manner the electric motors are really specific as well as silent. The drivers additionally support homing procedure without utilizing limit switches as the chauffeurs determine existing via motors and also spot the limit in this manner. This is why this equipment does not need physical limit switches for homing.
The machine has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device automatically quits if an accidental touch takes place. This is excellent for individuals that are worried regarding safety. The tool is likewise compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have the art work prepared, you can make use of the app to establish the laser. You can additionally customize the laser settings and also produce custom-made artwork. The app additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can engrave over 100 materials. The laser engraver device is easy to use and features a safety cover. The maker has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing maker. It cam be made use of to etch on all kinds of materials/.
Below is a checklist of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered equipment. Accurate, rapid and also solidly constructed. It comes with a premium cost, but it is worth it for a person that wants a good and almost an industrial quality table leading laser engraver with the ability of quick cutting as well as precise engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription and also reducing maker on our list is XTool D1 pro, the most effective choice to Glowforge. It is in starting point since it has actually obtained the Red Dot Style 2022 Award. The outstanding design and also state-of-the-art technology set this equipment apart from various other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, as well as XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a significant range of materials, from something as slim as tissue paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser inscription and cutting machine that works with a variety of products, consisting of various sorts of wood. Its powerful as well as extremely focused laser can quickly cut and also inscribed timber with ultimate accuracy and precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is specifically created metal as well as plastic engraving. It can inscribe numerous steels, including light weight aluminum and also precious metals. It can likewise do colored etching on numerous steels, including light weight aluminum.