What is the Makeblock XTool D1? K40 Laser Engraver 60hz
XTool D1 is a laser cutter that has been created by Makeblock. K40 Laser Engraver 60hz
The firm was established in 2012 by Jasen Wang, that researched aircraft style at Northwestern Polytechnic University. The firm is dedicated to producing ingenious products to assist individuals reveal themselves via development. Because its development, Makeblock has launched numerous educational robots, as well as a coding platform for kids. It likewise introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as inscribing a selection of products. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and can be used for various projects. Along with inscription, the D1 can likewise be used for other tasks, consisting of creating fashion jewelry and also light shades.
The D1 is a DIY package that can be constructed in only about half a hr. Its enclosure is collapsible, permitting easy transportability as well as effective air flow. It is likewise constructed from flame-retardant polyester, making it safe from dirt particles. The unit likewise secures the working surface under the equipment.
The XTool D1 is geared up with a laser component that is capable of engrave on metals as well as numerous various other products. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a variety of materials. The D1 additionally has a built-in smartphone application that can be downloaded and install from the Android Shop or the Apple Application Store. The application can be utilized to import laser layouts from free vector sites, including Etsy. The D1 can likewise be attached to a computer system by means of USB or WiFi. It can also move data by means of Wi-Fi or a big capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of the most generally made use of timbers for laser cutters. The D1 can also cut on various other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is flexible, enabling a 50mm variety. It can also process materials approximately 10mm thick, which suggests that it is able to etch on a wide range of materials. The D1 is created for both residence and also business usage.
The XTool D1 can be found in two models: the 20W variation and the 5W design. The 20W version has a bigger laser head, and also a smaller sized working area. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a faster device. K40 Laser Engraver 60hz
The D1 includes a steel frame, which gives optimum stability as well as longevity. It also has a simultaneous belt to boost motion precision. The belt’s modest tension is needed for precision, specifically when moving at broadband. The simultaneous belt can additionally aid the device stay secure and decrease vibration. It can also remove the activity void, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It creates clear lines to 0.06 mm. This makes it an outstanding selection for almost all etching jobs. Its layout is safe as well as trustworthy. It is perfect for small businesses as well as hobbyists.
It can engrave different types of steel and timber. It has the capacity to cut 8 to tenmm plywood in one pass. It additionally has the capability to cut natural leather and also polymer.
It includes a number of devices. You can acquire the bundle pack that includes the Air Assist Establish as well as Honeycomb Working Panel. It costs $119 and also $269, respectively. You can also get a 1064nm laser head. This head decreases shed marks in plastic as well as is particularly helpful for delicate jewelry styles. It additionally has a motion sensor and fire detection sensing unit.
It also features an emergency situation stop button. It can be regulated via WiFi and can import laser layouts from totally free vector sites like Etsy. You can also manage it by means of the Makeblock XTool D1 app on Android as well as iphone.
It has a very good emphasis mechanism. The laser crosshairs move as required and relocate to the framework of the art work. This makes the etching extremely accurate. It can likewise be utilized to develop a thickening impact, which can be useful when engraving large items.
The XTool D1 Pro has actually enhanced functions and laser power. It makes use of a 20W laser component to create a beam that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a higher rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is really smart. Alongside the laser component, there is a rotating arm which you take out when you want to focus the laser. It ensures that you go down the directly the correct distance from the product. After that you tighten up the thumb screw as well as pivot the arm back up. K40 Laser Engraver 60hz
XTool D1 Special Features
Right here are some of the top Unique Features of the XTool D1:
Wireless Connectivity
Device can be connected by means of USB or a Wi-fi. And also you can additionally regulate with a mobile phone application on Android or iphone.
Trimming and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can cut wood, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC as well as plastic given that it launches hydrogen chloride gas while being cut. This gas is toxic and very corrosive (your equipment will certainly rust promptly).
We have examined the device with inscription and also cutting different products. You will discover the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other machines. This must enable more precision and also less mechanical wobble when inscribing at high speeds. K40 Laser Engraver 60hz
Advanced Stepper Electric Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper electric motor drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are really accurate and quiet. The drivers also sustain homing treatment without making use of limit changes as the vehicle drivers measure existing via motors and find the limit this way. This is why this equipment does not require physical limitation switches for homing.
The device has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver device instantly quits if an unintended touch occurs. This is fantastic for individuals that are concerned concerning security. The device is likewise compatible with Windows and Mac OS systems.
The XTool D1 software application is really easy to use. As soon as you have actually the artwork prepared, you can make use of the application to set up the laser. You can also tailor the laser settings as well as create personalized artwork. The application additionally includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can etch over 100 materials. The laser engraver device is easy to use as well as includes a protective cover. The maker has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a very flexible etching machine. It cam be utilized to engrave on all types of products/.
Below is a listing of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out machine. Precise, fast as well as well developed. It comes with a premium cost, yet it is worth it for a person that desires an excellent as well as practically a commercial grade table top laser engraver with the ability of rapid cutting and also exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving and reducing maker on our listing is XTool D1 pro, the best option to Glowforge. It is in top place due to the fact that it has received the Red Dot Design 2022 Award. The impressive style and modern innovation set this device in addition to other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, as well as XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as etch a huge variety of products, from something as slim as cells paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser engraving as well as cutting device that is compatible with a large range of materials, including different sorts of wood. Its powerful as well as highly concentrated laser can easily reduce and also engraved wood with ultimate accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is specifically made for steel and also plastic inscription. It can inscribe numerous metals, including light weight aluminum and also rare-earth elements. It can also do tinted inscribing on numerous metals, including aluminum.