What is the Makeblock XTool D1? K40 Laser Setting Board
XTool D1 is a laser cutter that has actually been developed by Makeblock. K40 Laser Setting Board
The firm was developed in 2012 by Jasen Wang, who examined aircraft layout at Northwestern Polytechnic University. The business is devoted to creating ingenious products to help people express themselves with production. Since its creation, Makeblock has released a number of instructional robots, in addition to a coding platform for children. It likewise released the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that is capable of cutting and also engraving a variety of products. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and also can be used for many different jobs. In addition to engraving, the D1 can additionally be made use of for other jobs, consisting of creating fashion jewelry as well as light tones.
The D1 is a DIY kit that can be set up in only concerning half a hr. Its enclosure is collapsible, allowing for easy transportability and also effective air flow. It is likewise made of flame-retardant polyester, making it risk-free from dirt fragments. The unit likewise safeguards the working surface under the device.
The XTool D1 is equipped with a laser module that can engrave on metals and also several other materials. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to engrave on a wide range of materials. The D1 also has an integrated smart device app that can be downloaded from the Android Shop or the Apple Application Shop. The application can be used to import laser styles from cost-free vector sites, consisting of Etsy. The D1 can likewise be linked to a computer system via USB or WiFi. It can also move information through Wi-Fi or a big capability TF card.
The D1 can etching on Poplar plywood, which is among the most frequently used woods for laser cutters. The D1 can additionally reduce on other timbers, consisting of tough maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm array. It can likewise process products up to 10mm thick, which indicates that it has the ability to etch on a wide variety of products. The D1 is designed for both house and also business usage.
The XTool D1 can be found in 2 models: the 20W version and also the 5W model. The 20W variation has a larger laser head, and also a smaller sized working area. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster maker. K40 Laser Setting Board
The D1 includes a steel framework, which supplies optimum security and also durability. It also has a synchronous belt to improve movement accuracy. The belt’s moderate tension is needed for precision, particularly when relocating at high speeds. The simultaneous belt can also help the equipment keep secure and also lessen vibration. It can additionally eliminate the movement void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it an excellent option for mostly all inscribing jobs. Its layout is safe and also reputable. It is excellent for local business and also hobbyists.
It can etch different kinds of metal and wood. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut natural leather as well as polymer.
It features a number of accessories. You can get the bundle pack that includes the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can likewise get a 1064nm laser head. This head decreases shed marks in plastic and is especially useful for delicate jewelry designs. It likewise has a motion sensing unit as well as flame discovery sensor.
It additionally includes an emergency stop button. It can be regulated with Wi-fi as well as can import laser designs from free vector sites like Etsy. You can likewise regulate it through the Makeblock XTool D1 application on Android as well as iphone.
It has a great emphasis mechanism. The laser crosshairs relocate as needed as well as relocate to the structure of the artwork. This makes the etching extremely specific. It can also be used to develop a thickening effect, which can be useful when inscribing big things.
The XTool D1 Pro has improved functions and also laser power. It utilizes a 20W laser module to produce a beam that cuts things in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a higher rate. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is very clever. Next to the laser component, there is a rotating arm which you take out when you wish to concentrate the laser. It guarantees that you go down the head on the proper distance from the material. Then you tighten up the thumb screw and pivot the arm back up. K40 Laser Setting Board
XTool D1 Special Features
Below are a few of the leading Special Attributes of the XTool D1:
Wireless Connection
Device can be connected via USB or a WiFi. And you can also control with a smart device app on Android or iphone.
Trimming and also Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut timber, specifically Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC as well as vinyl considering that it launches hydrogen chloride gas while being cut. This gas is poisonous as well as really harsh (your equipment will certainly corrosion quickly).
We have actually tested the machine with engraving as well as reducing various products. You will certainly discover the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This need to enable even more accuracy and also less mechanical wobble when etching at broadband. K40 Laser Setting Board
Advanced Stepper Motor Drivers
The device has a really advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. By doing this the motors are really specific and also silent. The vehicle drivers also support homing treatment without making use of limitation changes as the drivers gauge present via electric motors as well as spot the limit in this manner. This is why this equipment does not need physical restriction switches for homing.
The device has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver device automatically stops if an unintended touch happens. This is great for individuals that are concerned concerning safety. The device is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software program is extremely easy to use. As soon as you have the art work prepared, you can utilize the app to set up the laser. You can also customize the laser settings and create personalized artwork. The application also includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can etch over 100 materials. The laser engraver tool is easy to use and includes a protective cover. The equipment has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a very functional inscribing maker. It cam be made use of to engrave on all sorts of materials/.
Below is a checklist of products as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered maker. Precise, rapid as well as sturdily built. It comes with a premium cost, yet it deserves it for somebody that desires a great as well as nearly an industrial grade table leading laser engraver with the ability of rapid cutting and also exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription and cutting machine on our listing is XTool D1 pro, the best choice to Glowforge. It is in starting point since it has obtained the Red Dot Design 2022 Honor. The outstanding style and state-of-the-art modern technology established this equipment in addition to various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a significant selection of products, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and also cutting machine that works with a variety of products, including different sorts of timber. Its powerful as well as extremely concentrated laser can quickly reduce and engraved wood with utmost accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is particularly created steel and plastic engraving. It can etch numerous steels, including light weight aluminum as well as precious metals. It can additionally do tinted inscribing on various metals, including light weight aluminum.