What is the Makeblock XTool D1? Xtool Support
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Support
The company was developed in 2012 by Jasen Wang, who studied aircraft layout at Northwestern Polytechnic University. The firm is dedicated to creating cutting-edge items to aid individuals express themselves through creation. Given that its development, Makeblock has released a number of academic robots, as well as a coding system for youngsters. It also launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing and also engraving a range of products. Its laser can eliminate complex shapes much faster than a scroll saw or jigsaw, as well as can be used for several projects. Along with inscription, the D1 can also be made use of for other tasks, consisting of creating jewelry as well as lamp tones.
The D1 is a DIY package that can be put together in only regarding half a hr. Its enclosure is foldable, allowing for very easy portability as well as effective air flow. It is additionally constructed from flame-retardant polyester, making it safe from dirt fragments. The enclosure likewise safeguards the working surface under the device.
The XTool D1 is furnished with a laser module that can engrave on metals and many other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer inscription and also higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to engrave on a vast array of products. The D1 likewise has an integrated smart device app that can be downloaded from the Android Shop or the Apple Application Store. The app can be made use of to import laser styles from cost-free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system by means of USB or WiFi. It can likewise move data by means of Wi-Fi or a large capability TF card.
The D1 can engraving on Poplar plywood, which is among one of the most typically used timbers for laser cutters. The D1 can additionally reduce on other timbers, consisting of tough maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm array. It can likewise refine materials as much as 10mm thick, which suggests that it has the ability to etch on a wide variety of products. The D1 is made for both home as well as service usage.
The XTool D1 can be found in 2 models: the 20W version as well as the 5W version. The 20W variation has a bigger laser head, as well as a smaller sized working location. The 5W design has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster equipment. Xtool Support
The D1 includes a steel framework, which supplies optimum security and sturdiness. It also has a simultaneous belt to boost activity precision. The belt’s moderate stress is needed for precision, specifically when moving at broadband. The synchronous belt can likewise assist the equipment stay stable as well as lessen vibration. It can likewise eliminate the activity space, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an excellent choice for nearly all etching jobs. Its style is risk-free as well as reliable. It is optimal for small companies as well as enthusiasts.
It can engrave various kinds of steel and timber. It has the capacity to reduce eight to tenmm plywood in one pass. It likewise has the capacity to reduce natural leather and acrylic.
It comes with a number of accessories. You can get the bundle pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head lowers shed marks in plastic and also is especially valuable for delicate fashion jewelry designs. It additionally has an activity sensing unit as well as flame detection sensor.
It likewise includes an emergency quit button. It can be controlled via WiFi and can import laser layouts from free vector websites like Etsy. You can also control it by means of the Makeblock XTool D1 app on Android and iphone.
It has an excellent focus device. The laser crosshairs relocate as needed as well as relocate to the structure of the art work. This makes the etching extremely accurate. It can additionally be made use of to develop a thickening impact, which can be beneficial when etching big things.
The XTool D1 Pro has actually boosted attributes and also laser power. It uses a 20W laser component to produce a light beam that cuts things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater rate. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is extremely brilliant. Alongside the laser module, there is a swivelling arm which you take out when you intend to concentrate the laser. It ensures that you go down the head on the correct distance from the material. Then you tighten the thumb screw and pivot the arm back up. Xtool Support
XTool D1 Special Features
Below are a few of the leading Unique Attributes of the XTool D1:
Wireless Connection
Maker can be linked by means of USB or a WiFi. As well as you can likewise regulate with a smart device app on Android or iOS.
Trimming as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The equipment can cut wood, particularly Poplar plywood which is soft and it is the recommended wood for all laser cutters.
I would certainly prevent some plastics like PVC and vinyl considering that it releases hydrogen chloride gas while being reduced. This gas is toxic and also extremely harsh (your device will certainly corrosion quickly).
We have actually checked the maker with engraving and cutting various products. You will find the results of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other equipments. This should permit more precision and less mechanical wobble when inscribing at high speeds. Xtool Support
Advanced Stepper Motor Drivers
The equipment has an extremely advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. This way the electric motors are extremely specific as well as quiet. The chauffeurs also sustain homing treatment without using limitation switches over as the chauffeurs gauge existing with motors and also identify the limit in this manner. This is why this maker does not require physical restriction switches over for homing.
The maker has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver device immediately quits if an accidental touch takes place. This is excellent for people who are concerned concerning safety. The tool is likewise compatible with Windows and also Mac OS systems.
The XTool D1 software application is really easy to use. As soon as you have actually the artwork prepared, you can utilize the application to set up the laser. You can likewise personalize the laser setups as well as create custom-made art work. The application also consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can inscribe over 100 products. The laser engraver device is easy to use and also features a protective cover. The maker has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing machine. It cam be utilized to engrave on all kinds of products/.
Right here is a listing of materials and also functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered maker. Specific, fast and also well developed. It comes at a premium rate, yet it deserves it for someone that wants a great and virtually an industrial grade table leading laser engraver with the ability of rapid cutting as well as precise inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and also cutting equipment on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in starting point because it has received the Red Dot Layout 2022 Honor. The superior style as well as modern modern technology set this equipment in addition to other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also etch a substantial range of products, from something as slim as tissue paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and also cutting device that is compatible with a wide variety of materials, including different kinds of timber. Its effective and also extremely focused laser can conveniently reduce and also etched timber with supreme accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is specifically produced steel and plastic engraving. It can inscribe numerous metals, consisting of aluminum and also precious metals. It can additionally do tinted engraving on different steels, including light weight aluminum.